Must have a third function to operate. ONLY Pressure comes from the remote, and return must be to the sump. (CANNOT RETURN THROUGH AUXILIARY HYDRAULICS)
NOT COMPATIBLE WITH DIVERTER VALVES
Minimum dry tractor weight of 3000 lbs
Minimum tractor width of 55 inches
Must have certified roll over protection system
For stabilization while operating the Lane Shark, fill rear tires of your tractor with water for use as a ballast, as well as additional weight on rear. ie: box blade, or rotary cutter.
Hammerhead Details:
Fully hydraulically articulated - control cutting positions from the comfort of your tractor seat
Hammerhead control switch box included
Cutting width / cutting area of 44"
Easily cuts up to 2-3” diameter limbs, brush, saplings, and underbrush. Cutting width is 44". The Hammerhead has a wide range of cutting positions that allow it to cut vertically, offset, directly in front (level), or 25°, 35°, & 45° in the vertical and offset positions
The Lane Shark Hammerhead attaches to the front of any FEL tractor with a SSQA or JD Hook & Pin-Style attachment system. There are adapters available to fit most other applications sold separately.
Rear rubber skirt and skid shoes for a smoother cutting process
The Lane Shark Hammerhead weighs just under 550 pounds
When purchasing the Lane Shark brush cutter, you will receive a unit equipped with #10 ORB (O-ring Boss) inlets. When using ORB, a minimum inside diameter of 1/2” is required.
